New Mexico CDL Requirements Guide

This page summarizes what New Mexico requires of Class A Commercial Learner's Permit (CLP) and Commercial Driver's License (CDL) applicants, with links to the official government sources. Requirements come from New Mexico's licensing agencies and federal regulations; FLO LLC's own training standards appear separately below. Sources were checked on 2026-10-13. Where anything here differs from the agency, the agency controls.

• New Mexico Motor Vehicle Division (MVD)

Official New Mexico CDL Manual

Commercial Driver's License Manual (Modernized), Version: March 2025 (New Mexico MVD posting 08/2025) — published by the state. FLO LLC links to the state's own document; it does not copy or host it.

READ NEW MEXICO CDL MANUAL

Opens the official PDF in a new tab. If it does not open, use the state's manual page: New Mexico Motor Vehicle Division (MVD) — manual page.

Commercial Learner's Permit (CLP) requirements

• Federal rule: a CLP is valid for no more than one year, and its holder may drive a commercial motor vehicle on public roads only when accompanied by a CDL holder with the proper class and endorsements (49 CFR 383.25).
• Confirm New Mexico's current procedure on the official New Mexico Motor Vehicle Division (MVD) page linked below.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 383.25 — Commercial learner's permit

CDL eligibility and age requirements

• Federal rule: a driver must be at least 21 years old to drive a commercial motor vehicle in interstate commerce (49 CFR 391.11(b)(1)).
• Confirm New Mexico's current procedure on the official New Mexico Motor Vehicle Division (MVD) page linked below.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 391.11 — General qualifications of drivers

Interstate versus intrastate driving

• Federal rule: a driver must be at least 21 years old to drive a commercial motor vehicle in interstate commerce (49 CFR 391.11(b)(1)).
• Every CLP and CDL applicant must self-certify one of four types of commercial driving — non-excepted interstate, excepted interstate, non-excepted intrastate, or excepted intrastate — and non-excepted drivers must provide a current medical examiner's certificate (49 CFR 383.71(b)(1)).
• Confirm New Mexico's current procedure on the official New Mexico Motor Vehicle Division (MVD) page linked below.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 391.11 — General qualifications of drivers · 49 CFR 383.71 — Driver application and certification procedures

Identity and residency documentation

• Proof of U.S. citizenship or lawful permanent residence, and two proofs of physical New Mexico residency dated within 60 days of the application (P.O. boxes are not acceptable).

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page

Legal-presence requirements

• Federal rule: CLP and CDL applicants must prove U.S. citizenship or lawful permanent residency, or qualify under the federal non-domiciled rules (49 CFR 383.71).
• Confirm New Mexico's current procedure on the official New Mexico Motor Vehicle Division (MVD) page linked below.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 383.71 — Driver application and certification procedures

Medical certification and self-certification

• All commercial driver medical certifications must be completed by a medical professional on the National Registry of Certified Medical Examiners.
• Every CLP and CDL applicant must self-certify one of four types of commercial driving — non-excepted interstate, excepted interstate, non-excepted intrastate, or excepted intrastate — and non-excepted drivers must provide a current medical examiner's certificate (49 CFR 383.71(b)(1)).

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 383.71 — Driver application and certification procedures

Knowledge examinations required

• Pass the written test(s) for the class of CDL and any endorsements; CDL applicants can take CDL written tests up to twice a week. Then receive a CDL learner's permit.
• Class A applicants take the General Knowledge and Combination Vehicles knowledge tests, plus Air Brakes for an air-brake vehicle (New Mexico manual, Section 1.1). Endorsements require their own tests.
• Federal standard: at least 80% correct is required to pass each knowledge test (49 CFR 383.135).

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 383.135 — Passing knowledge and skills tests

Steps to obtain the CLP

• 1. Study the official New Mexico CDL manual (link above).
• 2. Gather the identity, residency, Social Security and legal-presence documents the agency lists, and complete your self-certification (and medical examination if you are non-excepted).
• 3. Pass the required knowledge tests with the New Mexico MVD.
• 4. Receive your CLP.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page

CLP holding period

• Federal rule: a CLP holder may not take the CDL skills test during the first 14 days after the CLP is first issued (49 CFR 383.25(e)).
• Confirm New Mexico's current procedure on the official New Mexico Motor Vehicle Division (MVD) page linked below.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR 383.25 — Commercial learner's permit

Entry-Level Driver Training (ELDT) requirements

• As of February 7, 2022, attend ELDT with a provider on the Training Provider Registry.
• Federal Entry-Level Driver Training (ELDT) applies to anyone obtaining a Class A or Class B CDL for the first time, upgrading to Class A or B, or obtaining a first school bus, passenger or hazardous materials endorsement (49 CFR Part 380, Subpart F).
• ELDT has two parts — theory (classroom/online) and behind-the-wheel (range and public road) — and both must be completed with providers listed on the FMCSA Training Provider Registry, which reports your completion electronically before you may take the skills test.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR Part 380, Subpart F — Entry-Level Driver Training · FMCSA Training Provider Registry

Behind-the-wheel training requirements

• ELDT behind-the-wheel training must be taken from a behind-the-wheel provider listed on the FMCSA Training Provider Registry, on a range and on public roads, in a vehicle of the class you are training for. The instructor decides when you are proficient; federal rules set no minimum number of hours (49 CFR Part 380, Subpart F, Appendix A).
• FLO LLC's online course is ELDT THEORY only. It does not provide behind-the-wheel training.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page · 49 CFR Part 380, Subpart F — Entry-Level Driver Training · FMCSA Training Provider Registry

Skills examination procedures

• Pass a skills test administered by an approved CDL examiner; after receiving your scores, bring the required items to MVD, which verifies the scores electronically.
• The skills test has three parts taken in order — vehicle inspection, basic vehicle control and on-road driving. The New Mexico manual's basic control section describes the Modernized exercises: Forward Stop, Straight-Line Backing, Forward Offset Tracking and Reverse Offset Backing.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page

Licensing office and scheduling resources

• Use the official New Mexico Motor Vehicle Division (MVD) pages linked below to find offices, schedule tests and confirm current procedures.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page

Steps to receive your Class A CDL

• 1. Hold your CLP for at least the required holding period (federal minimum 14 days).
• 2. Complete ELDT theory (for example, FLO LLC's online course) and ELDT behind-the-wheel training with providers on the FMCSA Training Provider Registry.
• 3. Pass the three-part skills test with the New Mexico MVD or an authorized tester.
• 4. Obtain your Class A CDL from the New Mexico MVD.

Sources: New Mexico Motor Vehicle Division (MVD) — CDL page