Utah CDL Requirements Guide

This page summarizes what Utah requires of Class A Commercial Learner's Permit (CLP) and Commercial Driver's License (CDL) applicants, with links to the official government sources. Requirements come from Utah's licensing agencies and federal regulations; FLO LLC's own training standards appear separately below. Sources were checked on 2026-10-13. Where anything here differs from the agency, the agency controls.

• Utah Department of Public Safety, Driver License Division

Official Utah CDL Manual

2025 Edition Utah Commercial Driver License Handbook (Modernized, Version: March 2025) — published by the state. FLO LLC links to the state's own document; it does not copy or host it.

READ UTAH CDL MANUAL

Opens the official PDF in a new tab. If it does not open, use the state's manual page: Utah Department of Public Safety, Driver License Division — manual page.

Commercial Learner's Permit (CLP) requirements

• Federal rule: a CLP is valid for no more than one year, and its holder may drive a commercial motor vehicle on public roads only when accompanied by a CDL holder with the proper class and endorsements (49 CFR 383.25).
• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 383.25 — Commercial learner's permit

CDL eligibility and age requirements

• Federal rule: a driver must be at least 21 years old to drive a commercial motor vehicle in interstate commerce (49 CFR 391.11(b)(1)).
• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 391.11 — General qualifications of drivers

Interstate versus intrastate driving

• Federal rule: a driver must be at least 21 years old to drive a commercial motor vehicle in interstate commerce (49 CFR 391.11(b)(1)).
• Every CLP and CDL applicant must self-certify one of four types of commercial driving — non-excepted interstate, excepted interstate, non-excepted intrastate, or excepted intrastate — and non-excepted drivers must provide a current medical examiner's certificate (49 CFR 383.71(b)(1)).
• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 391.11 — General qualifications of drivers · 49 CFR 383.71 — Driver application and certification procedures

Identity and residency documentation

• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page

Legal-presence requirements

• Federal rule: CLP and CDL applicants must prove U.S. citizenship or lawful permanent residency, or qualify under the federal non-domiciled rules (49 CFR 383.71).
• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 383.71 — Driver application and certification procedures

Medical certification and self-certification

• Every CLP and CDL applicant must self-certify one of four types of commercial driving — non-excepted interstate, excepted interstate, non-excepted intrastate, or excepted intrastate — and non-excepted drivers must provide a current medical examiner's certificate (49 CFR 383.71(b)(1)).
• Confirm Utah's current procedure on the official Utah Department of Public Safety, Driver License Division page linked below.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 383.71 — Driver application and certification procedures

Knowledge examinations required

• All written knowledge test questions are based on the Commercial Driver License Handbook. The general written knowledge test (taken by all Class A, B and C applicants) has 50 questions; the air brake test has 25. Once you pass the general test, a CLP is issued for 180 days.
• Class A applicants take the General Knowledge and Combination Vehicles knowledge tests, plus Air Brakes for an air-brake vehicle (Utah manual, Section 1.1). Endorsements require their own tests.
• Federal standard: at least 80% correct is required to pass each knowledge test (49 CFR 383.135).

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 383.135 — Passing knowledge and skills tests

Steps to obtain the CLP

• 1. Study the official Utah CDL manual (link above).
• 2. Gather the identity, residency, Social Security and legal-presence documents the agency lists, and complete your self-certification (and medical examination if you are non-excepted).
• 3. Pass the required knowledge tests with the Utah Driver License Division.
• 4. Receive your CLP.

Sources: Utah Department of Public Safety, Driver License Division — Written page

CLP holding period

• You must hold the CDL learner permit for 14 days and complete ELDT before you are eligible for the CDL driving skills test.
• Federal rule: a CLP holder may not take the CDL skills test during the first 14 days after the CLP is first issued (49 CFR 383.25(e)).

Sources: Utah Department of Public Safety, Driver License Division — Driving page · Utah Department of Public Safety, Driver License Division — Written page · 49 CFR 383.25 — Commercial learner's permit

Entry-Level Driver Training (ELDT) requirements

• Prior to scheduling a driving skills test you must complete ELDT.
• Federal Entry-Level Driver Training (ELDT) applies to anyone obtaining a Class A or Class B CDL for the first time, upgrading to Class A or B, or obtaining a first school bus, passenger or hazardous materials endorsement (49 CFR Part 380, Subpart F).
• ELDT has two parts — theory (classroom/online) and behind-the-wheel (range and public road) — and both must be completed with providers listed on the FMCSA Training Provider Registry, which reports your completion electronically before you may take the skills test.

Sources: Utah Department of Public Safety, Driver License Division — Driving page · Utah Department of Public Safety, Driver License Division — Written page · 49 CFR Part 380, Subpart F — Entry-Level Driver Training · FMCSA Training Provider Registry

Behind-the-wheel training requirements

• ELDT behind-the-wheel training must be taken from a behind-the-wheel provider listed on the FMCSA Training Provider Registry, on a range and on public roads, in a vehicle of the class you are training for. The instructor decides when you are proficient; federal rules set no minimum number of hours (49 CFR Part 380, Subpart F, Appendix A).
• FLO LLC's online course is ELDT THEORY only. It does not provide behind-the-wheel training.

Sources: Utah Department of Public Safety, Driver License Division — Written page · 49 CFR Part 380, Subpart F — Entry-Level Driver Training · FMCSA Training Provider Registry

Skills examination procedures

• The CDL driving skills test consists of the pre-trip vehicle inspection, basic control skills and driving skills test. You must bring your own registered, road-ready vehicle to test at the Driver License Division. Basic control is passed with eight or fewer error points; the driving test with 30 or fewer.
• You may instead use an approved certified third-party tester, who submits results electronically to the DLD.
• The skills test has three parts taken in order — vehicle inspection, basic vehicle control and on-road driving. The Utah manual's basic control section describes the Modernized exercises: Forward Stop, Straight-Line Backing, Forward Offset Tracking and Reverse Offset Backing.

Sources: Utah Department of Public Safety, Driver License Division — Driving page · Utah Department of Public Safety, Driver License Division — Written page

Licensing office and scheduling resources

• Use the official Utah Department of Public Safety, Driver License Division pages linked below to find offices, schedule tests and confirm current procedures.

Sources: Utah Department of Public Safety, Driver License Division — Written page · Utah Department of Public Safety, Driver License Division — Driving page

Steps to receive your Class A CDL

• 1. Hold your CLP for at least the required holding period (federal minimum 14 days).
• 2. Complete ELDT theory (for example, FLO LLC's online course) and ELDT behind-the-wheel training with providers on the FMCSA Training Provider Registry.
• 3. Pass the three-part skills test with the Utah Driver License Division or an authorized tester.
• 4. Obtain your Class A CDL from the Utah Driver License Division.

Sources: Utah Department of Public Safety, Driver License Division — Written page